This Pin was discovered by Manila Stephen. Discover (and save!) your own Pins on Pinterest. Click and hold the Stop button. Click and hold the Power button. Release the Stop button (the Power button is still pressed). Press and release the Stop button 4 times. Press and hold the Stop button. Release the Power and Stop buttons together. Also Read: Epson L3150 Resetter Adjustment Program Free Download.
the tools that you need to do this can be downloaded here :CANON G2010 SERVICE TOOL
Canon G3400 Reset Tool Free
Download and extract using WinRAR or any aps that support unzipping file archive.
Canon G2010 problem code 5B00 mean the waste ink counter overflow, you should be reset Canon G2010 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And computer show up problem “SupportCode: 5B00”
Now , enter Canon G2010 service mode:
How to put Canon G2010 printer in service mode :
Step 1: Turn off Canon G2010 printer
Step 2: Press and hold printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G2010 printer’s RESET button 5 times @ 6 times (Bypass scanner)
Step 6: Released Canon G2010 printer’s POWER button:
Now, Canon G2010 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When computer detect FOUND NEW HARDWARE, press CANCEL
Run the service tool that we downloaded earlier..click on 'Accept'
Now click 'Start' under the Canon Tool
Now click the service tool in the number order...after clicking '1' the printer will print some number code, make sure the printer is loaded with 1 piece of paper.
After clicking '2' the printer will move it printhead a few times, just wait until it stop.
After clicking '3' the printer will print status sheet.
and you are all done, just restart the printer and you can print normally again.
Now check Canon G2010 printer status in Control Panel, If it shows “Printer is online“, your Canon G2010 printer is ready to print – no errors – no waste Counters Overflow.
Problem:
Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error P07, blink 7 times, blink 8 times, theinkabsorber becomes almost full, error E08, error E07.
Printer:
Canon Pixma G3000, G3100, G3200, G3400, G3500, G3900
Reset Canon G3000, G3100, G3200, G3400, G3500, G3900
Step 1: Enter Service Mode
2. Press and hold the Stop button.
4. Release the Stop button (the Power button is still pressed).
6. Press and hold the Stop button.
After the both buttons are released, the power indicator will blink green for some time and then the green will light constantly.
If after follow points 1-7 the green light not constantly but the printer continues to show an error, it's mean you made a mistake in points 1-7. Turn off the printer and repeat step 1.
Step 2: Reset Canon G3000 series
To reset the Canon G3000, G3100, G3200, G3400, G3500, G3900 can be done with (select one):
b.Service Tool v.4720
·Download Service Tool(support Win XP, Vista, 7, 8, 8.1, 10)
·Load paper
·Set (2)
·Click OK
·Turn off printer (wait 10 seconds)
·Printer ready for use
b.Reset with Service Tool v.4720
·Download Service Tool(support Win XP, Vista, 7, 8, 8.1, 10)
·Load paper
·Set (2)
·Click OK
·Turn off printer (wait 10 seconds)
·Printer ready for use
c.Reset with Service Tool v.4905
·Download Service Tool(support Win XP, Vista, 7, 8, 8.1, 10)
·Load paper
·Set (2)
Canon G3400 Driver Download
·Click OK
·Turn off printer (wait 10 seconds)
·Printer ready for use
Related Articles
Canon G3400 Reset Tool Manual
8 Signs You Should Avoid That Potenti…
Mental Slot Review and Playtest (NoLi…
Slip Anna
Easy Pizza Pinwheels Kids Love
Mental Slot Review and Playtest (NoLi…
Slip Anna
Easy Pizza Pinwheels Kids Love
This post first appeared on, please read the originial post:here